R&S ZNB Series User Manual page 613

®
R&S ZNB/ZNBT
This panel can also be activated by selecting the
to its description for background information, parameters and additional remote com-
mands.
If multiple port groups (DUTs)
enabled, the panel displays the available port groups. Select the port group whose
ground loop network shall be configured.
Active
The checkboxes in the "Active" column activate or deactivate the configured ground
loop deembedding/embedding (i.e. adds or removes it to/from the calculation flow)
without changing its parameters.
Remote command:
CALCulate<Ch>:TRANsform:VNETworks:GLOop:DEEMbedding<group>[:
STATe]
CALCulate<Ch>:TRANsform:VNETworks:GLOop:EMBedding<group>[:STATe]
File Name 1
The ellipsis button in the "File Name 1" column is enabled if a 1-port data
work (*.s1p file) is selected.
Note: The loaded S-parameter trace is stored in the active recall set. Persisted recall
sets contain the full embedding and deembedding data so that they can be transferred
to other instruments.
Remote command:
MMEMory:LOAD:VNETworks<Ch>:GLOop:DEEMbedding<group>
MMEMory:LOAD:VNETworks<Ch>:GLOop:EMBedding<group>
5.13.1.7 Impedance Renormalization panel
This panel provides alternative access to the reference impedance settings (see
erence Impedance tab"
Access:
User Manual 1173.9163.02 ─ 62
are configured and
on page 292).
Overview panel > "Impedance Renor."
GUI reference
Offset Embed softtool
Ground Loop tab softtool tab. Refer
Ground Loop per Port Group is
Network net-
"Ref-
613