R&S ZNB Series User Manual page 649

®
R&S ZNB/ZNBT
5.13.9 Differential Match tab
Allows you to specify a 2-port embedding network for the differential mode of a bal-
anced port.
Such a network is either defined
●
via its S-parameter stored in a two-port Touchstone file (*.s2p) or
●
by specifying the parameters of a "Shunt L, Shunt C" lumped element model
Use the complementary dock widget to access the balanced port configuration and to
activate or deactivate "Differential Match" embedding for selected balanced ports (see
Chapter 5.13.1.8, "Differential Match
Background information
Refer to
If the "Fixture Simulator" is disabled for the related channel (see
on page 549), this tab is inactive, i.e. all controls except the "Overview" button are
grayed out.
Overview
See
Type
Currently only Differential Match"Embedding" is supported.
User Manual 1173.9163.02 ─ 62
Chapter 4.6.2.8, "Differential match
"Overview" on page 616.
panel", on page 614).
embedding", on page 216.
GUI reference
Offset Embed softtool
"Fixture Simulator"
649