R&S ZNB Series User Manual page 251

®
R&S ZNB/ZNBT
Figure 4-25: Fixture modeling: EZD – Balanced Ports dialog
●
For general information about fixture de-embedding, see
modeling and
●
Option R&S ZNB/ZNBT-K210 can be ordered with a new instrument or retrofitted at
Rohde&Schwarz service.
4.7.9 In-situ de-embedding
Option R&S ZNB-K220/R&S ZNBT-K220
This option offers a pre-installed or service-retrofitted version of AtaiTec's In Situ De-
Embedding (ISD) tool for fixture de-embedding.
The tool is integrated into the de-embedding functionality of the analyzer firmware.
●
For general information about fixture de-embedding, see
modeling and
●
For detailed information about the ISD tool, see the product pages at
tec.com/products/isd/
Tips for using ISD
The ISD User's Guide offers the following guidelines to get the most out of ISD:
1. The Touchstone files must have enough number of points.
User Manual 1173.9163.02 ─ 62
deembedding", on page 217.
deembedding", on page 217.
Concepts and features
Optional extensions and accessories
Chapter 4.6.2.9, "Fixture
Chapter 4.6.2.9, "Fixture
http://atai-
251