R&S ZNB Series User Manual page 82

®
R&S ZNB/ZNBT
Tip: For a R&S ZNBT with more than 4 ports, the graphical port representation is
replaced by a generic port list. The selection logic is unchanged.
4. Select "Next" to proceed to the next page of the "Calibration Setting" wizard.
5. Select the test port connector type and gender (here: N 50 Ω, female, correspond-
ing to a male Through standard), and the calibration kit (here: R&S ZV-Z121).
6. Tap"Start".
User Manual 1173.9163.02 ─ 62
Getting started
Performing measurements
82