R&S ZNB Series User Manual page 653

®
R&S ZNB/ZNBT
Fixture Tool/Tool Info
The "Fixture Tool" combo-box allows you to select the third-party fixture modeling tool
to be used with the deembedding assistant (see
and deembedding",
Use the "Tool Info" button to get additional information about the selected tool.
Remote command:
CALCulate:FMODel:DEASsistant:TOOL
Timestamp Filenames
If "Timestamp Filenames" is checked, the names of subsequently generated "Test Cou-
pon" and "DUT + Test Fixture" files are prefixed with the current date and time.
Remote command:
CALCulate:FMODel:REName
Show Remeasure Warnings
If checked, the "Coupon" and "DUT + Test Fixture" measurements raise warnings, if
the measurement is repeated with different ports.
This setting is global.
Remote command:
n.a.
Output Directory...
Opens a dialog that allows you to specify the directory where the fixture modeling tools
store their data.
Default is C:\Users\Public\Documents\Rohde-Schwarz\Vna\Embedding.
Remote command:
CALCulate:FMODel:DIRectory
CALCulate:FMODel:DIRectory:DEFault
CALCulate:FMODel:DIRectory:DEFault:CLEar
Deembedding Files...
This button is only enabled, if the coupon data provided to the deembedding tool was
at least partly loaded from file. See
User Manual 1173.9163.02 ─ 62
on page 217).
"Page 2: Measure / Load and Apply"
Offset Embed softtool
Chapter 4.6.2.9, "Fixture modeling
GUI reference
on page 658.
653