R&S ZNB Series User Manual page 380

®
R&S ZNB/ZNBT
The active trace must be cartesian and the "Format" of the imported trace must be
the same as the "Format" of the active trace.
●
"Import File..." opens a dialog to load a limit line from a trace file (see
ter 5.5.11, "Trace Data
In case the selected file contains more than one trace, another popup dialog lets
you select the adequate one:
Imported traces are polygonal curves with n points and n – 1, where n is the "Number
of Points" of the imported trace
on page 423). The n – 1 segments are appended to the current segment table for fur-
ther editing. Existing limit line segments are not overwritten.
User Manual 1173.9163.02 ─ 62
tab", on page 365).
(seeChapter 5.10.1, "Sweep Params
GUI reference
Lines softtool
Chap-
tab",
380