R&S ZNB Series User Manual page 875

®
R&S ZNB/ZNBT
Use
EYE:MASK:SHAPe:TOP:STATe
The eye mask test is enabled/disabled using CALCulate<Chn>:EYE:MASK:STATe.
Suffix:
<Chn>
Parameters:
<Offset>
Options:
Manual operation:
CALCulate<Chn>:EYE:MASK:SHAPe:POLYgon:HORizontal <Main>[, <Minor>]
Defines the main [and minor] width of the center polygon in the mask of the related eye
diagram. The
CALCulate<Chn>:EYE:MASK:SHAPe:POLYgon:TYPE
This command will raise an execution error if the active trace in the selected channel is
not an eye diagram.
Use
vate the center polygon in the eye mask. The eye mask test is enabled/disabled using
CALCulate<Chn>:EYE:MASK:STATe.
Suffix:
<Chn>
Parameters:
<Main>
<Minor>
Options:
Manual operation:
CALCulate<Chn>:EYE:MASK:SHAPe:POLYgon:TYPE <PolygonType>
Defines the shape of the center polygon (octagon, hexagon or rectangle) in the eye
mask of the related eye diagram.
This command will raise an execution error if the active trace in the selected channel is
not an eye diagram.
Use
vate the area in the eye mask. The eye mask test is enabled/disabled using
CALCulate<Chn>:EYE:MASK:STATe.
Suffix:
<Chn>
Parameters:
<PolygonType>
User Manual 1173.9163.02 ─ 62
CALCulate<Chn>:EYE:MASK:SHAPe:BOTTom:STATe
.
Channel number used to identify the active trace
Default unit: V
R&S ZNB/ZNBT-K20
See
geometric interpretation
CALCulate<Chn>:EYE:MASK:SHAPe:POLYgon:STATe
.
Channel number used to identify the active trace
Default unit: s
Default unit: s
R&S ZNB/ZNBT-K20
See
CALCulate<Chn>:EYE:MASK:SHAPe:POLYgon:STATe
.
Channel number used to identify the active trace
OCTogon | HEXagon | RECTangle
to activate or deactivate the area in the eye mask.
"Top/Bottom Setup" on page 706
depends on the selected polygon type (see
"Polygon Setup" on page 705
Command reference
SCPI command reference
or
CALCulate<Chn>:
on page 875):
to activate or deacti-
to activate or deacti-
875