R&S ZNB Series User Manual page 857

®
R&S ZNB/ZNBT
Options:
CALCulate<Chn>:DTIMe:LIMit:LIMit <arg0>
Defines the limit value for the skew check.
Suffix:
<Chn>
Parameters:
<arg0>
Options:
Manual operation:
CALCulate<Chn>:DTIMe:LIMit:STATe <Boolean>
Activates/deactivates the skew limit check.
Use
Suffix:
<Chn>
Parameters:
<Boolean>
Options:
Manual operation:
CALCulate<Chn>:DTIMe:POSition <SkewPos>
Defines the position of the skew measurement.
Suffix:
<Chn>
Parameters:
<SkewPos>
Options:
Manual operation:
CALCulate<Chn>:DTIMe:STATe <Boolean>
Enables/disables the
User Manual 1173.9163.02 ─ 62
R&S ZNB/ZNBT-K20
.
Channel number used to identify the active trace
Limit value in seconds or meters, depending on the format of the
current trace's stimulus axis (see
TRANsform:TIME:XAXis).
R&S ZNB/ZNBT-K20
See
CALCulate<Chn>:DTIMe:LIMit:LIMit
.
Channel number used to identify the active trace
*RST:
R&S ZNB/ZNBT-K20
See
.
Channel number used to identify the active trace
Skew position as integer percentage of the step size
R&S ZNB/ZNBT-K20
See
Skew
"Skew Limit" on page 710
to set the applicable limit.
OFF
"Skew Check On" on page 710
"Skew Position" on page 709
Measurement.
Command reference
SCPI command reference
CALCulate<Chn>:
857