R&S ZNB Series User Manual page 887

®
R&S ZNB/ZNBT
Suffix:
<Chn>
Parameters:
<TimeGate>
Example:
Manual operation:
7.3.1.6 CALCulate:FMODel...
The CALCulate:FMODel... commands are related to "fixture modeling" tools (see
Chapter 4.6.2.9, "Fixture modeling and
● CALCulate:FMODel:DEASsistant......................................................................... 887
● CALCulate:FMODel:DELT.....................................................................................893
● CALCulate:FMODel:EZD...................................................................................... 902
● CALCulate:FMODel:ISD....................................................................................... 908
● CALCulate:FMODel:SFD...................................................................................... 917
● CALCulate:FMODel...
CALCulate:FMODel:DEASsistant...
These commands implement the functionality of the
related
The deembedding assistant functionality requires at least one of the fixture deembed-
ding software options:
●
R&S ZNB/ZNBT-K220 (see
●
R&S ZNB/ZNBT-K230 (see
on page 252)
●
R&S ZNB/ZNBT-K210 (see
370",
If options are of these available, the CALCulate:FMODel:DEASsistant commands
cannot be used.
CALCulate:FMODel:DEASsistant:COUPon:LEFT:CLEar
CALCulate:FMODel:DEASsistant:COUPon:RIGHt:CLEar
Clears the test coupon data available for the lead-in/lead-out.
Usage:
User Manual 1173.9163.02 ─ 62
.
Channel number used to identify the active trace
RECT | HAMMing | HANNing | BOHMan | DCHebyshev
RECT - steepest edges (rectangle)
HANN - normal gate (Hann)
HAMMing - steep edges (Hamming)
BOHMan - minimum flatness (Bohman)
DCHebyshev - arbitrary gate shape (Dolph-Chebychev)
*RST:
See
CALCulate<Chn>:FILTer[:GATE]:TIME:DCHebyshev
See "Shape"
(other)................................................................................921
Deembedding Assistant dock widget
on page 250)
Event
HANN
on page 354
deembedding",
Deembed Assistant tab
panel.
Chapter 4.7.9, "In-situ
Chapter 4.7.10, "Smart fixture
Chapter 4.7.8, "Eazy de-embedding based on IEEE
Command reference
SCPI command reference
on page 217).
and the
de-embedding", on page 251)
de-embedding",
887