R&S ZNB Series User Manual page 767

®
R&S ZNB/ZNBT
Create R&S Support Information
Saves the current selftest results to a zipped report file you can send to R&S Support
for fault diagnosis; see
on page 1532.
Remote command:
DIAGnostic:DEVice:STATe
SYSTem:DFPRint?
Setup tab
Displays the channel and trace settings of the active recall set and the main character-
istics of the instrument, including its IP address.
User Manual 1173.9163.02 ─ 62
Chapter 9.3, "Collecting information for technical
GUI reference
Setup softtool
support",
767