R&S ZNB Series User Manual page 891

®
R&S ZNB/ZNBT
Depending on the number of available test/DUT ports and the selected fixture tool
(CALCulate:FMODel:DEASsistant:TOOL), choose the appropriate <DutType>.
Parameters:
<DutType>
Options:
Manual operation:
CALCulate:FMODel:DEASsistant<Ph_pt>:FIXTure:LEFT:TYPE <FixtureType>
CALCulate:FMODel:DEASsistant:FIXTure:RIGHt:TYPE <FixtureType>
Allows you to specify models for the left side (lead-in) and right side (lead-out) of the
DUT, depending on the selected DUT type
DUT:TYPE
Parameters:
<FixtureType>
User Manual 1173.9163.02 ─ 62
SEX | SEXSe | BX | BXB | BXSE | SE21 | SE22 | NXSE |
NXMSe | NXB | NXMB
SEX
1 x single-ended
SEXSe
1 x 1 single-ended
BX
1 x balanced
BXB
1 x 1 balanced
BXSE
1 x balanced, 1 x single-ended (ISD only)
SE21
2 x 1 single-ended (ISD only)
SE22
2 x 2 single-ended (ISD only)
NXSE
n x single-ended (ISD only)
NXMSe
n x m single-ended (ISD only)
NXB
n x balanced (ISD only)
NXMB
n x m balanced (ISD only; currently not supported )
R&S ZNB/ZNBT-K220 | R&S ZNB/ZNBT-K230 | R&S ZNB/
ZNBT-K210
See "DUT"
on page 890).
NONE | SE | BALanced | COUPled | UNCoupled
NONE
Only for non-existing right sides (lead-outs).
SE
Single-ended; for single-ended lead-ins/outs
on page 655
(CALCulate:FMODel:DEASsistant:
Command reference
SCPI command reference
891