R&S ZNB Series User Manual page 608

®
R&S ZNB/ZNBT
Displayed Columns
Opens a dialog that lets you select between different ways to specify the offset, similar
to Delay / Electrical Length / Mech. Length
5.13.1.3 Single Ended panel
Allows you to activate or deactivate single ended deembedding/embedding for
selected physical ports. For the "2-Port Data" network type, it is also possible to
change the underlying s2p Touchstone file from the dock widget.
Access:
The "Single Ended" panel can also be activated by selecting the
tool tab. Refer to its description for background information, parameters and additional
remote commands.
Active
The checkbox in the "Active" column activates or deactivates the selected "Single
Ended" de-/embedding
tion flow) without changing its parameters.
Remote command:
CALCulate<Ch>:TRANsform:VNETworks:SENDed:DEEMbedding<PhyPt>[:
STATe]
CALCulate<Ch>:TRANsform:VNETworks:SENDed:EMBedding<PhyPt>[:
STATe]
User Manual 1173.9163.02 ─ 62
Overview panel > "Single Ended"
Single Ended tab
on the Offset tab.
(i.e. adds or removes it to/from the calcula-
GUI reference
Offset Embed softtool
Single Ended tab soft-
608