Calculate<Chn>:Marker<Mk>:Search:format; Calculate<Chn>:Marker<Mk>:Reference:search:format - R&S ZNB Series User Manual

®
R&S ZNB/ZNBT
Example:
Manual operation:
CALCulate<Chn>:MARKer<Mk>[:STATe] <Boolean>
CALCulate<Chn>:MARKer<Mk>:REFerence[:STATe] <Boolean>
Creates or removes the related marker (see
Suffix:
<Chn>
<Mk>
Parameters:
<Boolean>
Example:
Manual operation:
CALCulate<Chn>:MARKer[:STATe]:AREA <HorizontalPos>, <VerticalPos>
Moves the marker info field for the active trace <Chn> to one of nine predefined posi-
tions in the active diagram.
Suffix:
<Chn>
Parameters:
<HorizontalPos>
<VerticalPos>
Example:
Manual operation:
User Manual 1173.9163.02 ─ 62
Suppose the active recall set contains an active trace no. 1.
CALC:MARK ON; :CALC:MARK:FUNC:EXEC MAXimum
Create marker no. 1 and assign it to trace no. 1. Activate a maxi-
mum search for marker no. 1.
CALC:MARK:SEAR:TRAC ON
Enable the tracking mode for the created marker.
See "Tracking" on page 398
"Marker addressing"
.
Channel number used to identify the active trace
Marker number (ignored for reference markers)
ON | OFF – creates or removes the marker.
*RST: OFF
Suppose that the active recall set contains an active trace no. 1.
CALC:MARK ON; MARK2 ON
Create markers 1 and 2 and assign them to trace no. 1. The
default position of both markers is the center of the sweep
range.
See "On" on page 392
.
Channel number used to identify the active trace
LEFT | MID | RIGHt
Horizontal position
TOP | MID | BOTTom
Vertical position
See
CALCulate<Chn>:MARKer<Mk>:Y
See "Mkr 1 ... Mkr 10"
Command reference
SCPI command reference
on page 940).
on page 393
958