Table of Contents
Advertisement
®
R&S
ZNB/ZNBT
CALCulate<Chn>:MARKer<Mk>:DELTa[:STATe] <Boolean>
Switches the delta mode for marker <Mk> on trace no. <Chn> on or off. The marker
must be created before using
active trace contains no reference marker, the command also creates a reference
marker.
Suffix:
<Chn>
<Mk>
Parameters:
<Boolean>
Example:
Manual operation:
CALCulate<Chn>:MARKer<Mk>:EXCursion <Value>
CALCulate<Chn>:MARKer<Mk>:REFerence:EXCursion <TargetSearchVal>
Defines a marker-specific minimum excursion value for peak searches.
Use
MARKer<Mk>:REFerence:EXCursion:STATeto activate it.
Suffix:
<Chn>
<Mk>
Parameters:
<Value>
Manual operation:
CALCulate<Chn>:MARKer<Mk>:EXCursion:STATe <Boolean>
CALCulate<Chn>:MARKer<Mk>:REFerence:EXCursion:STATe <Boolean>
Activates or deactivates the marker-specific minimum excursion for peak searches.
Use
MARKer<Mk>:REFerence:EXCursion
User Manual 1173.9163.02 ─ 62
.
Channel number used to identify the active trace
Marker number.
ON | OFF - Enables or disables the delta mode.
*RST:
Suppose that the active recall set contains an active trace no. 1.
CALC:MARK ON
Create marker no. 1 and set it to the center of the sweep range.
CALC:MARK:DELT ON
Create a reference marker at the center of the sweep range and
set marker 1 to delta mode.
See
CALCulate<Chn>:MARKer<Mk>:EXCursion:STATe
.
Channel number used to identify the active trace
Marker number (ignored for reference markers)
Minimum peak excursion
The unit is derived from the active trace format and cannot be
modified. Changing the trace format resets the excursion to a
format-specific default value.
See
CALCulate<Chn>:MARKer<Mk>:EXCursion
CALCulate<Chn>:MARKer<Mk>[:STATe]
OFF
"Delta Mode"
on page 393
"Excursion Settings"
on page 401
to set the minimum peak excursion.
Command reference
SCPI command reference
or
CALCulate<Chn>:
or
CALCulate<Chn>:
ON. If the
946
Advertisement
Chapters
Table of Contents
