R&S ZNB Series User Manual page 686

®
R&S ZNB/ZNBT
Figure 5-72: Port Topology step (> 4 physical ports)
Step 2: Stimulus Settings
The "Stimulus Settings" step gives access to the basic settings of the
Settings dialog
formed.
Once you have selected a measurement, you can finish the wizard and proceed to the
Fixture Compensation dialog
User Manual 1173.9163.02 ─ 62
and allows you to select the time domain measurements to be per-
using the "Finish with Fixture Compensation" button.
GUI reference
Applic softtool
TDR Stimulus
686