R&S ZNB Series User Manual page 736

®
R&S ZNB/ZNBT
Related settings
Use the icons in the toolbar to add diagrams and traces. Use the "Zoom Active Trc"
icon to zoom into a rectangular portion inside a diagram. See also
dling diagrams, traces, and
graphical
Active Diagram
Selects the active diagram.
Each recall set screen can display several diagrams simultaneously, each with a vari-
able number of traces. One of these diagrams and traces is active at each time. The
diagram number (or name) in the upper right corner of the active diagram is highligh-
ted. At the same time, the active trace is highlighted in the trace list on top of the active
diagram (Trc3 in the figure below):
The analyzer provides several tools for activating diagrams:
●
tap on a point in the diagram to activate the diagram including the last active trace
in the diagram.
●
tap on a trace list to activate the trace including the corresponding diagram.
●
Some of the functions of the
responding diagram.
Remote command:
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:CATalog?
Add Tr+Diag
Creates a diagram and a trace which is displayed in the new diagram. The trace is cre-
ated with the channel settings of the previous active trace but with default trace set-
tings. The new diagram area is numbered <n>, where <n> is the largest of all existing
diagram area numbers plus one.
Tip: Dragging the "Trc+" toolbar icon to a new diagram area is similar to "Add Tr
+Diag".
User Manual 1173.9163.02 ─ 62
markers",
zoom", on page 73.
on page 66 and Chapter 3.3.7.1, "Using the
Traces tab activate a particular trace including the cor-
GUI reference
Display softtool
Chapter 3.3.5, "Han-
736