Steering Wheel Removal - Honda Accord 2008 Manual

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:19:41 61TA0000_170_0025

Power Steering

Steering Wheel Removal

SRS components are located in this area. Review the

SRS component locations: 4-door (see page 24-19),

2-door (see page 24-21) and the precautions and

procedures (see page 24-23) before doing repairs or

1. Do the battery terminal disconnection procedure

(see page 22-89).

2. Align the front wheels straight ahead, then remove

the driver's airbag from the steering wheel

(see page 24-206).

3. Disconnect the cable reel subharness connector (A).

4. Loosen the steering wheel bolt (B).

5. Install a commercially available steering wheel

puller (A) on the steering wheel (B). Free the

steering wheel from the steering column shaft by

turning the pressure bolt (C) of the puller.

Note these items when removing the steering

• Do not tap on the steering wheel or the steering

column shaft when removing the steering wheel.

• If you thread the puller bolts (D) into the wheel

hub more than five threads, the bolts will hit the

cable reel and damage it. To prevent this, install

a pair of jam nuts five threads up on each puller

6. Remove the steering wheel puller, then remove the

steering wheel bolt and steering wheel from the

steering column.

ＴＡ０８Ａ００Ｆ００００００５７１６１ＫＡＡＴ１０

Table of Contents