Honda Accord 2008 Manual page 1383

07/11/02 09:28:44 61TA0000_180_0050
Rear Suspension
Damper/Spring Removal and Installation (cont'd)
7. Remove the damper/spring (A) by lowering the rear
suspension.
NOTE: Be careful not to damage the body.
＊０５
A
18-50
Installation
1. Lower the rear suspension, and position the
damper/spring (A) in the body with the welded nut
(B) on the bottom of the damper facing forward.
NOTE:
• Be careful not to damage the body.
• Make sure the damper is installed in the correct
direction.
A
B
FRONT
2. Loosely install the new damper mounting nuts (A)
to the top of the damper.
＊０６
＊０７
A
10 x 1.25 mm
55 N·m
(5.6 kgf·m,
75.9 lbf·ft)
Replace.