Honda Accord 2008 Manual page 1694

07/11/02 09:33:17 61TA0000_200_0127
7. Remove the tool box spacer (A). 4-door is shown;
2-door is similar.
＊２４
A
8. Remove the spare tire.
9. Remove the clips, then remove the spare tire pan
carpet (A). 4-door is shown; 2-door is similar.
＊２５
Fastener Locations
: Clip, 2
A
10. Detach the clips (A) and the harness holders (B)
from the stud bolts, then remove the rear
wheelhouse insulator (C). 4-door is shown; 2-door
is similar.
Fastener Locations
A
: Clip B : Harness holder
2-door, 3 2-door, 1
4-door, 2 4-door, 2
C
C
A
A
11. Install the trim in the reverse order of removal, and
note these items:
• If the clips are damaged or stress-whitened,
replace them with new ones.
• Push the clips and the hooks into place securely.
＊２６
2-door: A
4-door: B
B
20-125