Honda Accord 2008 Manual page 1046

Hide thumbs Also See for Accord 2008:
Table of Contents

Advertisement

07/11/02 09:17:34 61TA0000_140_0203
19. Check for Temporary DTCs or DTCs with the HDS.
Is DT C P17 17 indicated?
YES
Check for poor connections or loose
terminals between the transmission range switch
and the PCM. If the PCM was updated, substitute a
known-good PCM (see page 14-8), then go to step
18. If the PCM was substituted, go to step 1.
NO
Go to step 20.
20. Monitor the OBD STATUS for P1717 in the DTCs
MENU with the HDS.
Does the HDS indicate PASSED?
YES
If the PCM was updated, troubleshooting is
complete. If the PCM was substituted, replace the
original PCM (see page 11-232). If any other
Temporary DTCs or DTCs were indicated in step 19,
go to the indicated DTC's troubleshooting.
NO
If the HDS indicates FAILED, check for poor
connections or loose terminals between the
transmission range switch and the PCM. If the PCM
was updated, substitute a known-good PCM
(see page 14-8), then go to step 18. If the PCM was
substituted, go to step 1. If the HDS indicates NOT
COMPLETED, go to step 18.
14-201

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents