Honda Accord 2008 Manual page 1605

07/11/02 09:29:12 61TA0000_200_0038
Doors
Rear Door Panel Removal/Installation (cont'd)
6. While holding the door panel (A) away from the
door, remove the inner handle (B) from the door
panel by releasing the hooks (C).
＊０５
7. Remove the door panel (A) while pulling the inner
handle (B) out through the hole in the door panel.
While holding the door panel away from the door,
disconnect the power window switch connector (C).
＊０６
20-36
C
B
C
B
C
8. Disconnect the inner handle cable (A) and the latch
cable (B) from the inner handle (C), then remove
the handle.
–1 Detach the inner handle cable fasteners (D, E),
then disconnect the inner handle cable from
the cable fasteners.
–2 Detach the latch cable fastener (F), and remove
the latch cable fastener (G) from the inner
handle by pinching its tabs out.
NOTE: Check if the cable fasteners are
damaged or stress-whitened.
A
D
F
B
G
A
9. Remove the power window switch panel (A) from
the door panel (B).
–1 Detach the rear clip.
–2 Pull out along the edge of the panel to release
all of the hooks (C).
–3 Pull the switch panel rearward to release the
front hook (D).
Fastener Location
: Clip, 1
A
E
C
D
A
C
B
C
＊０７
＊０８