Honda Accord 2008 Manual page 1231

07/11/02 09:24:10 61TA0000_140_0388
A/T Differential
Component Location Index
＊０１
14-386 14-386
ＴＡ０８ＡＥＢＥ１０４１１６０００００ＤＡＡＴ００
THRUST SHIM, 76 mm
Preload Inspection,
page 14-391
THRUST WASHER, 76.2 mm
BEARING OUTER RACE
Replacement, page 14-389
CARRIER BEARING
Replacement, page 14-387
FINAL DRIVEN GEAR
Replacement,
page 14-387
DIFFERENTIAL CARRIER
Backlash Inspection,
page 14-386
Replacement, page 14-387
CARRIER BEARING
Replacement, page 14-387
BEARING OUTER RACE
Replacement, page 14-389
THRUST WASHER, 80 mm
Backlash Inspection
1. Install both axles into on the A/T differential, then
place the axles on V-blocks.
2. Check the backlash of the pinion gears (A) using a
dial indicator (B).
Standard: 0.05 0.15 mm (0.002 0.006 in.) −
B
A
3. If the backlash is out of standard, replace the
differential carrier.
ＴＡ０８ＡＥＢＥ１０４１１６１９６４１ＭＡＡＴ００
−
A
＊０１