Honda Accord 2008 Manual page 1615

07/11/02 09:29:47 61TA0000_200_0048
Doors
Rear Door Sash Outer Trim Replacement
4-door
NOTE: Take care not to scratch the door.
1. Remove the door outer molding (see page 20-48).
2. Pull the door sash outer trim (A) up to release the
trim from the clips, and release the trim from
between the door glass outer weatherstrip (B) and
the door, then remove the trim. Take care not to
damage the door glass outer weatherstrip.
＊０３
Fastener Locations
: Clip, 2
3. If the clips are damaged or stress-whitened, or the
trim will be replaced, remove the clips from the
door.
4. If the old trim will be reinstalled, and the clips are
damaged or stress-whitened, replace them with
new ones.
20-46
5. If the door sash outer trim (A) will be replaced, or
the clips (B) are removed from the door, insert the
trim between the door glass outer weatherstrip (C)
and the door, and install the trim by pushing on the
clip portions until the clips snap into place.
A
6. If the clips (A) are not removed from the door,
install the door sash outer trim (B) by inserting it to
the clips and between the door glass weatherstrip
(C) and the door.
B
B
7. Reinstall the door outer molding (see page 20-48).
ＴＡ０８ＡＢ４Ｊ１６１６６２２１５１１ＫＢＡＴ２０
A
A
B
C
C
＊０４
＊０５