Clutch Clearance Inspection - Honda Accord 2008 Manual

07/11/02 09:23:28 61TA0000_140_0365

Clutch Clearance Inspection

Special Tools Required
Clutch compressor attachment 07ZAE-PRP0100
1. Inspect the clutch piston, the discs, the plates, and
the end-plate for wear and damage (see page
14-361), and inspect the clutch wave-plate phase
difference (see page 14-362), if necessary.
2. Install the clutch piston in the clutch drum. Do not
install the O-rings during inspection.
＊０１
3. Install the waved spring (A) in the 1st clutch drum
(B). Install the clutch flat-plate (C), then starting
with the clutch disc, alternately install the clutch
discs (D) (5) and the clutch wave-plates (E) (4), then
install the clutch end-plate (F) with the flat side
toward the top disc.
＊０２
A
B
4. Install the waved spring (A) in the 2nd clutch drum
(B). Install the flat-plate (C), then starting with the
clutch disc, alternately install the clutch discs (D) (6)
and the wave-plates (E) (5), then install the clutch
end-plate (F) with the flat side toward the top disc.
A
B
5. Install the waved spring (A) in the 3rd clutch drum
(B). Install the clutch flat-plate (C), then starting
with the clutch disc, alternately install the clutch
discs (D) (6) and the clutch wave-plates (E) (5), then
install the clutch end-plate (F) with the flat side
toward the top disc.
F
E
A
D
B
C
ＴＡ０８ＡＥＢＥ１０４１１２１２２１１ＭＡＡＴ００
＊０３
F
E
D
C
＊０４
F
E
D
C
(cont'd)
14-363