Honda Accord 2008 Manual page 1209

07/11/02 09:23:29 61TA0000_140_0366
Shafts and Clutches
Clutch Clearance Inspection (cont'd)
6. Install the waved spring (A) in the 4th clutch drum
(B). Starting with the clutch wave-plate, alternately
install the clutch wave-plates (C) (4) and the clutch
discs (D) (4), then install the clutch end-plate (E)
with the flat side toward the top disc.
＊０５
A
B
7. Install the waved spring (A) in the 5th clutch drum
(B). Starting with the clutch wave-plate, alternately
install the clutch wave-plates (C) (4) and the clutch
discs (D) (4), then install the clutch end-plate (E)
with the flat side toward the top disc.
＊０６
A
B
14-364
8. Install the snap ring using a screwdriver.
E
D
C
9. Set a dial indicator (A) on the clutch end-plate (B).
E
B
D
C
10. Zero the dial indicator with the clutch end-plate
lifted up to the snap ring (C).
A
C
＊０７
＊０８