Dynamic Damper Replacement - Honda Accord 2008 Manual

07/11/02 09:17:12 61TA0000_160_0010
Driveline/Axle

Dynamic Damper Replacement

1. Remove the inboard joint (see page 16-6).
2. Remove the dynamic damper band (see step 2 on
page 16-7).
3. Remove the dynamic damper.
Left driveshaft
＊０１
Right driveshaft
＊０２
16-10
4. Install the new dynamic damper and adjust the
position of the new dynamic damper to these
measurements.
NOTE: Be careful not to swap the dynamic dampers.
The right and left dynamic dampers are different.
Left driveshaft: 298.5 303.5 mm (11.75 11.94 in.) −
Right driveshaft: 292.5 297.5 mm (11.51 11.71 in.) −
5. Install the dynamic damper band (see step 10 on
page 16-14).
6. Install the inboard joint (see page 16-12).
ＴＡ０８ＡＥ４Ｅ１６２２６６２２５０２ＫＢＡＴ１０
−
−
＊０３