Mainshaft Disassembly - Honda Accord 2008 Manual

07/11/02 09:24:38 61TA0000_130_0036
Manual Transmission
Mainshaft Assembly Clearance
Inspection (cont'd)
10. Measure the length of the MBS distance collar.
If the length is not within standard, replace the
MBS distance collar.
Standard: 23.95 24.05 mm (0.943 0.947 in.)
＊０９
13-36 13-36
− −

Mainshaft Disassembly

1. Remove the angular ball bearing (A) and the
tapered cone ring using a commercially available
bearing separator (B) and a commercially available
bearing puller (C). Make sure the bearing separator
is under the tapered cone ring.
A
B
2. Support 5th gear (A) on steel blocks, and press the
mainshaft out of the 5th synchro hub (B).
NOTE: Do not use a jaw-type puller; it can damage
the gear teeth.
ＴＡ０８ＡＥＡＥ３４１５０４０００００ＬＣＡＴ００
C
B
A
＊０１
＊０２