Honda Accord 2008 Manual page 1148

07/11/02 09:20:42 61TA0000_140_0305
21. Connect PCM connector A (49P).
22. Disconnect the transmission range switch
connector.
23. Turn the ignition switch to ON (II).
24. Measure the voltage between transmission range
switch connector terminals No. 6 and No. 10.
＊０８
TRANSMISSION RANGE SWITCH CONNECTOR
ATP P (BLK/BLU)
Is there battery voltage?
YES
NO −
25. Turn the ignition switch to LOCK (0).
26. Disconnect PCM connector B (49P).
GND (BLK)
Wire side of female terminals
−
Go to step 30.
Go to step 25.
27. Check for continuity between PCM connector
terminal B14 and body ground.
PCM CONNECTOR B (49P)
ATP P (BLU/BLK)
Terminal side of female terminals
Is there continuity?
YES − Repair short to body ground in the wire
between PCM connector terminal B14 and the
transmission range switch connector.
NO − Go to step 28.
28. Check for continuity between PCM connector
terminal B14 and transmission range switch
connector terminal No. 6.
PCM CONNECTOR B (49P)
ATP P (BLK/BLU)
Terminal side of
female terminals
Is there continuity?
−
YES Go to step 29.
NO − Repair open in the wire between PCM
connector terminal B14 and the transmission range
switch connector.
TRANSMISSION RANGE
SWITCH CONNECTOR
ATP P (BLK/BLU)
Wire side of
female terminals
(cont'd)
14-303
＊０９
＊１０