07/11/02 09:37:42 61TA0000_200_0203
10. Remove the nut, then release the bracket (A) of
airbag wire C from the seat-back frame (B).
*11
Fastener Location
: Nut, 1
C
11. Release airbag wire A and airbag wire B from the
seat-back frame (C).
*12
A
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
A
B
C
12. Except driver's manual height adjustable seat:
Remove the lumbar support motor cover (A)
(driver's seat) or the ODS unit cover (B) (passenger's
seat).
–1 Turn over the seat-back cover (C) and the pad
(D) as needed.
–2 Release the cover from the lower hooks (E).
–3 Pull the cover upward to release it from the
upper hook (F).
Driver's seat
F
B
E
G
Passenger's seat
A
B
B
D
A
B
13. Except driver's manual height adjustable seat:
Disconnect the seat wire harness connector (G) and
the OPDS sensor connectors (H) on the passenger's
seat.
C
D
A
C
F
E
H
G
(cont'd)
20-201
*22
*13