Honda Accord 2008 Manual page 912

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 08:47:15 61TA0000_140_0069

R Position: Shifting to R position from P or N position

When shifting to R, the PCM turns shift solenoid valves B and E ON, and A, C, and D are turned OFF. Shift solenoid

valve B pressure (SB) is applied to the right side of shift valve B, and shift valve B is moved to the left side. Shift

solenoid valve E pressure (SE) is applied to the left side of shift valve E, and shift valve E is moved to the right side.

Line pressure (1) changes to (3) at the manual valve, and flows to the servo valve via shift valve E. The servo valve is

moved to the reverse range position. Movement of shift valves B and E, and the servo valve creates 4th clutch line

pressure between the 4th clutch and A/T clutch pressure control solenoid valve A. 4th clutch pressure (40) is applied to

the 4th clutch, and the 4th clutch is engaged gently.

NOTE: When used, ''left'' or ''right'' indicates direction on the hydraulic circuit.

TRANSMISSION

FLUID PRESSURE

COUNTERSHAFT

RELIEF VALVE

REGULATOR VALVE

MANUAL VALVE

TRANSMISSION

FLUID PRESSURE

SERVO CONTROL

A/T CLUTCH PRESSURE

CONTROL SOLENOID VALVES

Chapters

Table of Contents