Symptom Troubleshooting - Honda Accord 2008 Manual

07/11/02 09:19:08 61TA0000_170_0007
Power Steering
Symptom Troubleshooting Index (cont'd)
Symptom
Fluid leaks from
the power
steering line
Fluid leaks from
the power
steering pump
Fluid leaks from
the power
steering
reservoir
Fluid leaks from
the power
steering pump
outlet hose
(high-pressure)
Fluid leaks from
the power
steering pump
inlet hose
(low-pressure)
17-6
Procedure(s)
• Fluid leaks from the cylinder line connections (flare nuts). Tighten
the connection and retest (see page 17-15).
• Fluid leaks from a damaged cylinder line(s). Replace the cylinder
line (see page 17-15).
• Fluid leaks from the pump outlet hose or return line fitting on the
valve body unit (flare nuts). Tighten the fitting and retest. If it still
leaks, replace the hose, the line, or valve body unit as necessary.
• Fluid leaks from the front oil seal. Replace the front oil seal.
• Fluid leaks from the power steering pump housing. Replace the
leaking O-rings or seals (see page 17-17), and if necessary replace
the power steering pump (see page 17-16).
• Fluid leaks from around the reservoir cap because fluid level is too
high. Drain the reservoir to the proper level. If the fluid is aerated
check for an air leak on the inlet side of pump.
• Fluid leaks from reservoir. Check the reservoir for cracks and
replace as necessary.
• Check the fitting for loose bolts. If the bolts are tight, replace the
fitting O-ring.
• Fluid leaks at the swagged joint. Replace the pump outlet hose.
Check the hose for damage, deterioration, or improper assembly.
Replace or repair as necessary.
Also check for
Fluid contamination
Fluid contamination
Fluid contamination
Fluid contamination
Fluid contamination