Honda Accord 2008 Manual page 1557

07/11/02 09:37:14 61TA0000_190_0136
VSA System Components
Symptom Troubleshooting (cont'd)
14. Reconnect all connectors.
15. Update the VSA modulator-control unit if it does
not have the latest software (see page 19-140). If
the unit already has the latest software, substitute a
known-good VSA modulator-control unit (see page
19-141).
16. Turn the ignition switch to LOCK (0), then turn it to
ON (II) again.
17. Check the ABS indicator, brake system indicator
and the VSA indicator for several seconds when the
ignition switch is turned to ON (II).
Do the indicators come on then go of f ?
YES − If the VSA modulator-control unit was
updated, troubleshooting is complete. If the VSA
modulator-control unit was substituted, replace the
original VSA modulator-control unit (see page
19-141).
NO − Check for loose terminals in the VSA
modulator-control unit 36P connector. If the VSA
modulator-control unit was updated, substitute a
known-good VSA modulator-control unit (see page
19-141), then retest. If the VSA modulator-control
unit was substituted, go to step 1.
19-136