Honda Accord 2008 Manual page 1589

07/11/02 09:29:03 61TA0000_200_0022
Doors
Front Door Outer Handle Replacement (cont'd)
5. Driver's door: Pull both side flanges (A) of the
retainer (B) outward, and pull the middle flange
portion (C) of the outer casing cover (D) out, then
disconnect the cylinder cable (E) from the latch.
4-door is shown; 2-door is similar.
＊０５
E
B
A
B
20-20
E
D
C
A
6. 2-door: Pull the glass run channel (A) away as
needed, and remove the bolt, then remove the
center lower channel (B) by pulling it downward.
Fastener Location
: Bolt, 1
B
6 x 1.0 mm
8 N·m
(0.8 kgf·m, 6 lbf·ft)
＊０６
A