Honda Accord 2008 Manual page 1315

07/11/02 09:20:20 61TA0000_170_0049
Power Steering
Steering Gearbox Overhaul (cont'd)
23. Apply vinyl tape (A) to the splines on the pinion
shaft.
＊１７
24. Separate the valve housing (A) from the pinion
shaft/sleeve (B) and valve oil seal (C).
＊１８
17-48
25. With your finger, check the inner wall of the valve
housing where the seal ring slides. If there is a step
in the wall, the housing is worn. Replace it.
A
26. Check for wear, burrs, and other damage to the
edges of the grooves in the sleeve.
NOTE: The pinion shaft and sleeve are a precision
matched set. If either the pinion shaft or sleeve
must be replaced, replace both parts as a set.
A
B
C
Replace.
＊１９
＊２０