Honda Accord 2008 Manual page 836

07/11/02 09:25:34 61TA0000_130_0063
8. Align the socket holder (A) on the shift cables (B)
with the slot in the bracket base (C), then slide the
holder into the base. Install the shift cable ends (D)
to the shift lever assembly (E) then install the shift
lever assembly.
NOTE: When installing the shift cable (shift lever
side), position the indent shape (F) to the upper
side.
＊０５
F
＊０６
C
D
D
9. Install the bolts, the washer (A), and the cotter pin
(B).
NOTE: You can install the cotter pin from either
direction.
E
B
10. Install the harness clamps.
A
11. Install the center console panel (see page 20-145).
8 x 1.25 mm
22 N·m (2.2 kgf·m, 16 lbf·ft)
A B
8 x 1.25 mm
22 N·m (2.2 kgf·m, 16 lbf·ft)
＊０７
＊０８
13-63