07/11/02 09:22:11 61TA0000_140_0326
Transmission Housing
Housing and Shaft Assembly Removal
Special Tools Required
Housing puller 07HAC-PK40102
1. Remove the ATF feed pipe (A) from the idler gear shaft, and remove the ATF lubrication pipe (B) from the
transmission housing.
*01
2. Remove the shift solenoid valve cover (C), the dowel pins (D), and the gasket (E).
3. Disconnect the connectors from the shift solenoid valves, and remove the shift solenoid wire harness (F) with the
O-ring.
4. Remove the input shaft (mainshaft) speed sensor (G) and the output shaft (countershaft) speed sensor (H) with
their O-rings.
5. Remove the transmission housing mounting bolts (19 bolts) (I) and the transmission hanger (J).
14-324
TA08AEBE10410459801KAAT00
I
G
H
A
B
C
E
D
F
J