07/11/02 08:47:45 61TA0000_140_0092
Automatic Transmission
DTC Troubleshooting (cont'd)
36. Check for Temporary DTCs or DTCs with the HDS.
Is DT C P07 06 indicated?
YES
−
Check for poor connections or loose
terminals between the transmission range switch
and the PCM. If the PCM was updated, substitute a
known-good PCM (see page 14-8), then go to step
35. If the PCM was substituted, go to step 1.
NO
−
Go to step 37.
37. Monitor the OBD STATUS for P0706 in the DTCs
MENU with the HDS.
Does the HDS indicate PASSED?
YES
−
If the PCM was updated, troubleshooting is
complete. If the PCM was substituted, replace the
original PCM (see page 11-232). If any other
Temporary DTCs or DTCs were indicated in step 36,
go to the indicated DTC's troubleshooting.
NO
−
If the HDS indicates FAILED, check for poor
connections or loose terminals between the
transmission range switch and the PCM. If the PCM
was updated, substitute a known-good PCM
(see page 14-8), then go to step 35. If the PCM was
substituted, go to step 1. If the HDS indicates NOT
COMPLETED, go to step 35.
14-90