Honda Accord 2008 Manual page 1656

07/11/02 09:31:12 61TA0000_200_0089
Sunshade Replacement
1. Remove the drain channel (see page 20-86).
2. Slide the sunshade (A) until you can see both
sunshade slider spacers (B).
＊０１
Fastener Locations
3. Remove the screws, then remove both spacers.
4. While lifting the front portion of the sunshade (A),
move the sunshade forward until you can see both
sunshade rear hooks (B). Do not damage the
sunshade and the hooks.
＊０２
Fastener Locations
5. Remove the screws, then remove both hooks.
: Screw, 4
A
: Screw, 4
B
A
6. Remove the sunshade (A).
B
A
7. Remove both front sunshade base sliders (A) and
both rear sunshade base sliders (B).
8. Install the sunshade in the reverse order of removal,
and note these items:
• Check the glass position adjustment (see page
20-83).
• Reset the moonroof control unit (see page
22-350).
9. Check for water leaks. Let the water run freely from
a hose without a nozzle. Do not use a high-pressure
spray.
ＴＡ０８ＡＢ９Ｊ３４２０００４１４０１ＫＢＡＴ００
B
A
20-87
＊０３
＊０４