Honda Accord 2008 Manual page 1287

07/11/02 09:19:38 61TA0000_170_0021
Power Steering
Pump Overhaul (cont'd)
16. Coat the new 57.2 mm O-ring (A) with power
steering fluid, and install it into the groove in the
side plate (B).
＊０７
C
A
Replace.
17. Set the side plate with the slot (C) facing up, and
align the hole (D) in the side plate and the slot (E) in
the pump housing.
18. Install the outer case (A) by aligning the slot (B)
inside the pump housing with the roll pin hole (C)
on the side plate.
＊０８
19. Install the roll pin (D) into the set hole.
17-20
D
B
D
B
A
C
20. Install the cam ring (A) by aligning the slot (B)
outside of the cam ring with the slot (C) in the outer
case.
D
Replace.
A
C
E
21. Apply power steering fluid to the rubber seal (D)
(black) and slipper seal (E) (white), and install them
in the slot (F) of the cam ring.
E
Replace.
B
F
＊０９