Honda Accord 2008 Manual page 1106

07/11/02 09:19:17 61TA0000_140_0263
38. Attach the torque converter to the drive plate with
the eight bolts (A). Rotate the crankshaft pulley as
necessary to tighten the bolts to 1/2 of the specified
torque, then to the final torque, in a crisscross
pattern. After tightening the last bolt, check that the
crankshaft rotates freely.
＊１８
39. Install the torque converter cover (B).
A
6 x 1.0 mm
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
B
6 x 1.0 mm
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
40. Install exhaust pipe A with the bolts, new self-
locking nuts, and new gaskets (B) (C).
B
A
C
10 x 1.25 mm
33 N·m
(3.4 kgf·m,
25 lbf·ft)
Replace.
8 x 1.25 mm
22 N·m
(2.2 kgf·m,
16 lbf·ft)
(cont'd)
14-261
＊１９