Honda Accord 2008 Manual page 1717

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:34:14 61TA0000_200_0150

Center Console Removal/

Installation (cont'd)

6. Install the console in the reverse order of removal,

and note these items:

• Make sure each connector is plugged in properly.

• If the clips are damaged, replace them with new

• Push the clips and the hooks into place securely.

Center Console Rear Trim Removal/

Installation

Special Tools Required

KTC trim tool set SOJATP2014

Available through the American Honda Tool and

Equipment Program; call 888-424-6857

• Take care not to scratch the center console and the

related parts.

• Use the appropriate tool from the KTC trim tool set to

avoid damage when removing components.

1. Gently pull out the console rear trim (A) to detach

the clips, then remove the trim.

Fastener Locations

2. Install the trim in the reverse order of removal, and

note these items:

• If the clips are damaged or stress-whitened,

replace them with new ones.

• Push the clips into place securely.

ＴＡ０８Ａ００Ｊ２６２１６５１６４１５ＫＤＡＴ００

Chapters

Table of Contents