Honda Accord 2008 Manual page 1691

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:33:15 61TA0000_200_0124

Interior Trim

Trim Removal/Installation - Rear Shelf Area (cont'd)

7. Install the shelf in the reverse order of removal, and

note these items:

• Using a clip remover, remove any clips left in the

body, and reinstall them on the rear shelf.

• If the clips are damaged or stress-whitened,

replace them with new ones.

• Be careful not to damage the speakers.

• When installing the rear shelf, slip the rear seat

belt and the rear center seat belt through the slits

in the rear shelf properly.

• Push the clips and the hooks into place securely.

• Make sure the high mount brake light socket is

connected securely, and the ANC rear

microphone subharness connector (for some

models) is plugged in properly.

Rear Parcel Shelf Dynamic Damper - 2-door

• Put on gloves to protect your hands.

• Take care not to scratch the body.

1. Remove the rear shelf.

2. Remove the bolts (A), then remove the rear parcel

shelf dynamic damper (B). Take care not to hit the

rear window when removing the bolts.

3. Install the damper in the reverse order of removal.

(1.0 kgf·m, 7.2 lbf·ft)

Chapters

Table of Contents