Honda Accord 2008 Manual page 1761

07/11/02 09:37:09 61TA0000_200_0194
Seats
Rear Seat Access Cable
Replacement (cont'd)
4. Remove the screw, then remove the rear seat
access cable (A).
＊０２
Fastener Location
: Screw, 1
5. Install the rear seat access cable in the reverse
order of removal, and note these items:
• Make sure the cable is connected securely.
• Install the cable in the same positions noted in
step 3. Check the rear seat access operation:
Make sure both of the seat tracks unlatches
simultaneously and the seat slides forward when
the seat-back is folded down.
20-192 20-192
A
Front Seat Frame Replacement
Special Tools Required
KTC trim tool set SOJATP2014
Available through the American Honda Tool and
Equipment Program; call 888-424-6857
Driver's Seat
Check the operation of the driver's seat position sensor
after any of these actions (see page 24-42):
• Driver's seat position sensor replacement
• Cover plate (front side of driver's seat slide rail)
replacement
NOTE:
• Put on gloves to protect your hands.
• Use the appropriate tool from the KTC trim tool set to
avoid damage when removing components.
• If the side airbag has deployed, replace the seat
frame and related parts with new ones (see page
24-203).
1. Remove the front seat (see page 20-180).
2. Remove these items:
• Front seat-back cover/pad:
– 2-door (see page 20- 198)
– 4-door (see page 20- 204)
• Front seat cushion cover/pad:
– 2-door (see page 20- 208)
– 4-door (see page 20- 217)
• Seat belt buckle (see page 24-10)
• Seat position sensor (see page 24-234)
• Side airbag (see page 24-209)
ＴＡ０８Ａ００Ｊ４６１２７０５３６７６ＫＢＡＴ１０