Honda Accord 2008 Manual page 1395

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:29:28 61TA0000_180_0062

Tire Pressure Sensor Location (cont'd)

5. Follow HDS screen prompts to turn on the TPMS

sensor initializer tool (A). Verify that the power

switch (B) is in the ''Low'' position.

6. Follow the prompts on the HDS to activate the tire

pressure sensors using the TPMS sensor initializer

tool. Start with the left-front (LF) wheel.

• See the HDS Help menu for specific instructions.

• Initialize the wheel in the sequence shown.

INITIALIZATION SEQUENCE :

Right-rear (RR)

Right-front (RF)

Left-rear (LR)

Left-front (LF)

7. Check the HDS screen, and note the active sensor

reception order of the tire pressure sensor 1, 2, 3, 4.

NOTE: If the sensor does not respond to the TPMS

initializer, rotate the tire 1/4 turn and retry. If the

sensor still does not respond after one full rotation

of the tire, swap the tire to a known-good location

and retry. If the sensor still does not respond after

one full rotation of the tire, replace the tire pressure

8. Note the sensor location for reference.

9. Turn the ignition switch to LOCK (0).

Chapters

Table of Contents