Honda Accord 2008 Manual page 1057

Hide thumbs Also See for Accord 2008:
Table of Contents

Advertisement

07/11/02 09:17:35 61TA0000_140_0214
Automatic Transmission
DTC Troubleshooting (cont'd)
DTC U0029:
F-CAN Malfunction (F-CAN BUS-
OFF (PCM))
NOTE: Before you troubleshoot, record all freeze data
and any on-board snapshot with the HDS, and review
General Troubleshooting Information (see page 14-4).
1. Turn the ignition switch to ON (II).
2. Clear the DTC with the HDS.
3. Check for Temporary DTCs or DTCs in the PGM-FI
SYSTEM with the HDS.
Is DT C U0029 indicated in the PGM-F I SY ST EM?
YES
Go to the DTC U0029 troubleshooting in the
PGM-FI SYSTEM (see page 11-190).
NO
Go to step 4.
4. Check for Temporary DTCs or DTCs in the A/T
SYSTEM with the HDS.
Is DT C U0029 indicated in the A/ T SY ST EM?
YES
Go to step 5.
NO
Intermittent failure, the system is OK at this
time. If any other Temporary DTCs or DTCs were
indicated, go to the indicated DTC's
troubleshooting.
5. Update the PCM if it does not have the latest
software (see page 11-231), or substitute a known-
good PCM (see page 14-8).
14-212
6. Turn the ignition switch to ON (II), and wait for at
least 5 seconds.
7. Check for Temporary DTCs or DTCs in the A/T
SYSTEM with the HDS.
Is DT C U0029 indicated in the A/ T SY ST EM?
YES
Check for poor connections or loose
terminals at the PCM. If the PCM was updated,
substitute a known-good PCM (see page 14-8), then
go to step 6. If the PCM was substituted, go to step
1.
NO
Go to step 8.
8. Monitor the OBD STATUS for U0029 in the DTCs
MENU with the HDS.
Does the HDS indicate PASSED?
YES
If the PCM was updated, troubleshooting is
complete. If the PCM was substituted, replace the
original PCM (see page 11-232). If any other
Temporary DTCs or DTCs were indicated in step 7,
go to the indicated DTC's troubleshooting.
NO
If the HDS indicates FAILED, check for poor
connections or loose terminals at the PCM. If the
PCM was updated, substitute a known-good PCM
(see page 14-8), then go to step 6. If the PCM was
substituted, go to step 1. If the HDS indicates NOT
COMPLETED, go to step 6.
TA08AEBK771000U0029FAAT00

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents