Honda Accord 2008 Manual page 1108

07/11/02 09:19:18 61TA0000_140_0265
49. Install the washers (A) between the steering
gearbox and the rear engine mount base bracket,
then install the gearbox stiffeners (B) and the bolts
on the left side of the steering gearbox, and tighten
the bolts.
＊２２
10 x 1.25 mm
49 N·m
(5.0 kgf·m, 36 lbf·ft)
A
14 x 1.5 mm
74 N·m
10 x 1.25 mm
(7.5 kgf·m, 54 lbf·ft)
49 N·m
(5.0 kgf·m, 36 lbf·ft)
B
A
14 x 1.5 mm
74 N·m
(7.5 kgf·m, 54 lbf·ft)
50. Install the rear mount upper base bracket (A), the
bolts (B), and a new bolt (C), and tighten the bolts.
B
12 x 1.25 mm
54 N·m
(5.5 kgf·m, 40 lbf·ft)
A
51. Install the rear mount with new bolts.
12 x 1.25 mm
54 N·m (5.5 kgf·m, 40 lbf·ft)
Replace.
12 x 1.25 mm
78 N·m (8.0 kgf·m, 58 lbf·ft)
Replace.
＊２３
C
12 x 1.25 mm
54 N·m
(5.5 kgf·m,
40 lbf·ft)
Replace.
＊２４
(cont'd)
14-263