Honda Accord 2008 Manual page 1658

07/11/02 09:31:13 61TA0000_200_0091
3. With an assistant holding the frame (A), remove the
bolts (B, C) starting at the rear, and release the rear
hooks (D) by moving the frame forward.
2-door
＊０２
Fastener Locations
B
4-door
＊０３
Fastener Locations
B
B
4. With the help of an assistant, carefully remove the
frame through the front door opening. Take care
not to scratch the interior trim and body, or tear the
seat covers.
: Bolt, 8 C : Bolt, 1
6 x 1.0 mm
A
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
B
C
B
B
B
B
B
6 x 1.0 mm
D
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
D
: Bolt, 9
B
B
B
B
B
B
6 x 1.0 mm
D
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
D
Front Drain Tube
5. Remove these items:
• Front door sill trim
– 2-door (see page 20-97)
– 4-door (see page 20-99)
• Kick panel
– 2-door (see step 5 on page 20-98)
– 4-door (see step 5 on page 20-99)
6. Remove these items from the passenger's side:
• Glove box (see page 20-160)
D • Stereo amplifier (see page 23-115)
7. Detach the clip (A) securing the front drain tube (B).
To remove a front drain valve (C) from the body, tie
a string to the top end of the drain tube, then pull
the drain tube down out of the A-pillar. Leave the
B
string in the pillar to use when reinstalling the drain
tube.
B
A
A
D
B
B
B
C
20-89
＊０４
(cont'd)