Honda Accord 2008 Manual page 1621

07/11/02 09:29:50 61TA0000_200_0054
Doors
Door Position Adjustment (cont'd)
4-door front
＊０７
4-door rear
＊０８
A
E
8 x 1.25 mm
29 N·m
(3.0 kgf·m, 22 lbf·ft)
20-52
D
A
8 x 1.25 mm
29 N·m
(3.0 kgf·m, 22 lbf·ft)
F
8 x 1.25 mm
29 N·m
(3.0 kgf·m,
22 lbf·ft)
A
C
B
D
8 x 1.25 mm F
29 N·m 8 x 1.25 mm
(3.0 kgf·m, 29 N·m
22 lbf·ft) (3.0 kgf·m, 22 lbf·ft)
F
8 x 1.25 mm
29 N·m
(3.0 kgf·m,
22 lbf·ft)
A
C
F
8 x 1.25 mm
29 N·m (3.0 kgf·m, 22 lbf·ft)
E
8 x 1.25 mm
29 N·m (3.0 kgf·m, 22 lbf·ft)
3. If necessary, replace the door mounting bolts with
the adjusting bolts (P/N 90102-SFA-305) made
specifically for door adjustment, then adjust at the
door: Loosen the door mounting bolts (F) slightly,
and move the door up or down as necessary to
equalize the gaps, and move it in or out until it's
flush with the body.
4. Check that the door and body edges are parallel. If
necessary, adjust the door cushions (A) to make the
rear of the doors flush with the body.
5. Apply touch-up paint to the hinge mounting bolts,
and around the hinges.
6. Check for water leaks (see step 8 on page 20-51).
B
A A
A
＊０９