Idler Gear Shaft Removal And Installation - Honda Accord 2008 Manual

Hide thumbs Also See for Accord 2008:

Table of Contents

07/11/02 09:22:54 61TA0000_140_0357

Idler Gear Shaft Removal and Installation

1. Remove the snap ring (A), the cotter retainer (B),

and the cotters (C). Do not distort the snap ring.

2. Remove the idler gear shaft/idler gear assembly (D)

from the transmission housing.

3. Check the snap rings and the cotter retainer for

wear and damage. Replace them if they are worn,

distorted, or damaged.

4. Install the idler gear shaft/idler gear assembly in

the reverse order of removal.

ＴＡ０８ＡＥＢＥ１０４１０４３４０７１ＫＤＡＴ００

Table of Contents