Honda Accord 2008 Manual page 1162

07/11/02 09:20:48 61TA0000_140_0319
Type B Shift Lever
NOTE: The A/T gear position indicator panel light
harness and the park pin switch are not available
separately. Replace the A/T gear position indicator
panel light harness and the park pin switch as a set.
1. Remove these items:
• Center console panel (see page 20-145)
• Center console rear trim (see page 20-148)
• Center console (see page 20-147)
2. Remove the shift lever assembly (see page 14-273).
3. Wrap the end of a flat-tip screwdriver with tape, pry
the shift lever knob cover locks, and remove the
shift lever knob cover (A).
＊０６
C
E
A
B
F
D
4. Remove the screws (B), and remove the shift lever
knob (C) from the shift lever.
5. Remove the A/T gear position indicator panel light
socket (D) from the indicator panel base (E).
6. Remove the A/T gear position indicator panel (F),
and disassemble the indicator panel and the panel
base.
7. Remove the light bulb (A) from the socket.
A
B
E
8. Remove the park pin switch/A/T gear position
indicator panel light harness (B) and the shift lock
solenoid harness (C) from the harness guide (D).
9. Install a new park pin switch (E).
10. Route the park pin switch/A/T gear position
indicator panel light and the shift lock solenoid
harness in the harness guide.
11. Install the A/T gear position indicator panel light
bulb in the socket.
C
D
(cont'd)
14-317
＊０７